e1000 probe failed with error -2

[goodian1987]

lspci发现能识别出网卡来，装了e1000驱动，起来机器后上不了网
lspci：中的信息
0a:00.0 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
0a:00.1 Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) (rev 01)
dmesg 信息为：
[ 57.873024] Intel(R) PRO/1000 Network Driver - 1.9.5-NAPI
[ 57.873025] Copyright(c) 1999 - 2011 Intel Corporation.
[ 57.873086] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[ 57.873887] e1000: probe of 0000:0a:00.0 failed with error -2
[ 57.873902] PCI: Setting latency timer of device 0000:0a:00.1 to 64
[ 57.874688] e1000: probe of 0000:0a:00.1 failed with error -2
[ 57.874700] Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
[ 57.874702] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[ 57.874791] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[ 57.874792] e100: Copyright(c) 1999-2006 Intel Corporation
[ 57.875168] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 57.875170] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 57.875186] ESB2: IDE controller at PCI slot 0000:00:1f.1
[ 57.875195] ESB2: chipset revision 9
[ 57.875197] ESB2: not 100% native mode: will probe irqs later
[ 57.875215] ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
[ 57.875225] ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:pio
[ 57.875232] Probing IDE interface ide0...
跪求大牛解释