文件系统制作 kernel panic

diandianyangyi 2013-06-30 02:22:15

依照开发板的实验文档制作了一个jffs2的文件系统，出现
Kernel panic - not syncing: Attempted to kill init! 信息，不知道错在哪里。

现在将简要信息粘贴如下，还请帮忙分析错误。
1. 使用友善的工具 yaffs2image.tgz，连接如下
http://download.csdn.net/detail/diandianyangyi/5326854
可以制作成功。
操作命令 ./mkfs.yaffs2 rootfs(文件夹) yafs.img(生成文件)
之后烧写到友善的开发板上，整个系统可以运行，没有跳出任何错误。
烧写到友善的板子上。

2.但是使用粤嵌的工具制作成 mkfs.jffs2 制作文件系统的时候，就出现
Kernel panic - not syncing: Attempted to kill init! 的信息。
使用的命令
mkfs.jffs2 -r rootfs -e 0x4000 --pad=0x1e00000 - -p -o rootfs.jffs2
可以制作出文件系统出来。但是就是跳出了错误来。
烧写到粤嵌的板子上

全部信息如下：

Uncompressing Linux........................................................................................................................................................................ done, booting the kernel.
Linux version 2.6.30.4 (root localhost.localdomain) (gcc version 4.4.3 (ctng-1.6.1) ) #102 Fri Jun 28 09:02:33 EDT 2013
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: SMDK2410
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
USB Control, (c) 2009 gec2410
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: root=/dev/mtdblock2 init=/linuxrc console=ttySAC0,115200 rootfstype=jffs2 rw
NR_IRQS:99
irq: clearing pending status 00002000
irq: clearing subpending status 00000092
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 59384KB available (4740K code, 434K data, 212K init, 0K highmem)
Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 936 bytes
NET: Registered protocol family 16
S3C Power Management, Copyright 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (extended precision)
Installing knfsd (copyright (C) 1996 okir monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W DEBUG].
JFFS2 version 2.2. (NAND) (SUMMARY) Â 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 116
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Console: switching to colour frame buffer device 40x30
fb0: s3c2410fb frame buffer device
adc initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
brd: module loaded
loop: module loaded
usbcore: registered new interface driver ub
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
dm9000 Ethernet Driver
eth%d: Invalid ethernet MAC address. Please set using ifconfig
Now use the default MAC address: 08:90:90:90:90:90
eth0 (dm9000): not using net_device_ops yet
eth0: dm9000 at c4872000,c4876000 IRQ 16 MAC: 08:90:90:90:90:90
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
STRIP: Version 1.3A-STUART.CHESHIRE (unlimited channels)
usbcore: registered new interface driver zd1201
usbcore: registered new interface driver usb8xxx
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
libertas_spi: Libertas SPI driver
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
NAND_ECC_NONE selected by board driver. This is not recommended !!
Scanning device for bad blocks
Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x000000000000-0x000000040000 : "Boot"
0x000000040000-0x000000340000 : "Kernel"
0x000000340000-0x000002140000 : "Fs"
0x000002140000-0x000004000000 : "Other Fs"
usbmon: debugfs is not available
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
port #1 suspened!
port #0 alived!
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
s3c2410 TouchScreen successfully loaded
input: s3c2410 TouchScreen as /class/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
mapped channel 0 to 0
s3c2440-sdi s3c2440-sdi: powered down.
s3c2440-sdi s3c2440-sdi: initialisation done.
s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
Advanced Linux Sound Architecture Driver Version 1.0.18a.
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
UDA134X SoC Audio Codec
s3c2440-sdi s3c2440-sdi: powered down.
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
#0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: setting system clock to 2008-11-18 21:09:23 UTC (1227042563)
JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
VFS: Mounted root (jffs2 filesystem) on device 31:2.
Freeing init memory: 212K
usb 1-1: new full speed USB device using s3c2410-ohci and address 2
Kernel panic - not syncing: Attempted to kill init!

还请帮忙解惑，thanks in advance!
或者给点提示应该如何着手解决这个问题，也好。

...全文