关于移植3GDongle HuaWeiE1750到Android

刘云 2013-09-16 08:51:38

配置内核选项Make MenuConfig选择
Devces drivers-->
USB seupport-->
<M>USB Serial Converter support
--> <M> USB driver for GSM and CDMA modems

USB Generic Serial Driver，保存退出。运行make modules，编译成功后可找到usbserial.ko及option.ko两个驱动，加载驱动usbserial.ko没问题，但是加载option,ko报错

insmod option.ko                                    

[  582.054456] option: Unknown symbol usb_wwan_write (err 0)

[  582.059875] option: Unknown symbol usb_wwan_suspend (err 0)

[  582.065500] option: Unknown symbol usb_wwan_close (err 0)

[  582.070933] option: Unknown symbol usb_wwan_release (err 0)

[  582.076529] option: Unknown symbol usb_wwan_tiocmget (err 0)

[  582.082210] option: Unknown symbol usb_wwan_chars_in_buffer (err 0)

[  582.088490] option: Unknown symbol usb_wwan_write_room (err 0)

[  582.094373] option: Unknown symbol usb_wwan_disconnect (err 0)

[  582.100231] option: Unknown symbol usb_wwan_startup (err 0)

[  582.105813] option: Unknown symbol usb_wwan_set_termios (err 0)

[  582.111790] option: Unknown symbol usb_wwan_resume (err 0)

[  582.117298] option: Unknown symbol usb_wwan_dtr_rts (err 0)

[  582.122900] option: Unknown symbol usb_wwan_open (err 0)

[  582.128249] option: Unknown symbol usb_wwan_ioctl (err 0)

[  582.133681] option: Unknown symbol usb_wwan_tiocmset (err 0)

insmod: init_module 'option.ko' failed (No such file or directory)

...全文

368 6 打赏收藏转发到动态举报

写回复

6 条回复

切换为时间正序

请发表友善的回复…

发表回复

daocaoren_127 2014-08-03

打赏
举报

回复

问题解决了，根据串口的提示： option: Unknown symbol usb_wwan_write 是缺少 usb_wwan.ko模块导致，insmod这个模块即可解决问题

daocaoren_127 2014-08-03

打赏
举报

回复

楼上这种人就是贱B，特地发个贴说自己解决了也不愿意分享怎么解决的。只懂索取不知贡献的渣滓，现实中应该也是个LOSER。

刘云 2013-12-24

打赏
举报

回复

少加载一个模块导致的，已经解决了

韩半仙 2013-11-26

打赏
举报

回复

为什么要编译成模块手动加载，直接编译进内核不行吗

lefenxiang 2013-11-26

打赏
举报

回复

你的是少了init.h头文件么？

lefenxiang 2013-11-26

打赏
举报

回复

请问你解决了么，我也碰到了相同的问题。

Android系统3GDongle调试_V1.1_20120213[归纳].pdf

适合simcom7600 4G/gprs , linux驱动移植

arm linux下调试Huawei的3G USB 上网模块

调通sina33下的AP6212A0版本的BT 大文实验室/大文哥壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/6/26 11:01 版本：V1.0 本文参照：《A33 wifi移植说明书.pdf》还有就是全志R16的parrotv1.1的官方SDK（Android4.4.2） 1、打开AP6212的BT，关闭rtl8723bs的BT： [ 3.141273] Bluetooth: HCI UART driver ver 2.2 [ 3.146210] Bluetooth: HCI H4 protocol initialized [ 3.151563] Bluetooth: HCI BCSP protocol initialized [ 3.157154] usbcore: registered new interface driver btusb [ 3.163282] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.169599] Bluetooth: BlueSleep Mode Driver Ver 1.1 [ 3.175402] Bluetooth: get rtl8723bs rtl8723bs_bt_host_wake gpio failed [ 3.953017] Bluetooth: RFCOMM TTY layer initialized [ 3.958456] Bluetooth: RFCOMM socket layer initialized [ 3.964183] Bluetooth: RFCOMM ver 1.11 [ 3.968340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.968638] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.968734] [mmc]: mclk 0xf1c20090 0xc100000b [ 3.989421] Bluetooth: BNEP filters: protocol multicast [ 3.995242] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.001921] L2TP core driver, V2.0 [ 4.005706] PPPoL2TP kernel driver, V2.0 [ 4.010070] L2TP IP encapsulation support (L2TPv3) [ 4.015468] L2TP netlink interface [ 4.019264] L2TP ethernet pseudowire support (L2TPv3) [ 4.023860] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B [ 4.023929] [mmc]: mclk 0xf1c20090 0xc100000b [ 4.040272] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 4.048780] ThumbEE CPU extension supported. [ 4.053550] Registering SWP/SWPB emulation handler [ 4.059269] [rfkill]: rfkill set power 1 [ 4.063652] gpio ap6xxx_bt_regon set val 0, act val 0 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r$ ll rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4$ make ARCH=arm menuconfig [*] Networking support ---> <*> Bluetooth subsystem support ---> Bluetooth device drivers ---> < > Broadcom Bluetooth Low Power Manager Support <*> Realtek Bluesleep driver support 修改为： <*> Broadcom Bluetooth Low Power Manager Support < > An inverter between bt hostwake pin and cpu (NEW) < > Realtek Bluesleep driver support 2、（这个不修改：） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\overlay\frameworks\base\core\res\res\values\config.xml

"bt-pan" 3、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\astar_y3.mk # ap6181/6210/6330 sdio wifi fw and nvram #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6181/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6210/device-bcm.mk) $(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6212/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6330/device-bcm.mk) #rtl8723bs bt fw and config #$(call inherit-product, hardware/realtek/bluetooth/rtl8723bs/firmware/rtlbtfw_cfg.mk) # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-y3/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini #add gms features #PRODUCT_COPY_FILES += \ # frameworks/native/data/etc/android.hardware.faketouch.xml:system/etc/permissions/android.hardware.faketouch.xml \ # frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ # frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml # 3G Data Card Packages #PRODUCT_PACKAGES += \ # u3gmonitor \ # chat \ # rild \ # pppd # 3G Data Card Configuration Flie #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/ip-down:system/etc/ppp/ip-down \ # device/softwinner/polaris-common/rild/ip-up:system/etc/ppp/ip-up \ # device/softwinner/polaris-common/rild/3g_dongle.cfg:system/etc/3g_dongle.cfg \ # device/softwinner/polaris-common/rild/usb_modeswitch:system/bin/usb_modeswitch \ # device/softwinner/polaris-common/rild/call-pppd:system/xbin/call-pppd \ # device/softwinner/polaris-common/rild/usb_modeswitch.sh:system/xbin/usb_modeswitch.sh \ # device/softwinner/polaris-common/rild/apns-conf_sdk.xml:system/etc/apns-conf.xml \ # device/softwinner/polaris-common/rild/libsoftwinner-ril.so:system/lib/libsoftwinner-ril.so #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/init.3gdongle.rc:root/init.sunxi.3gdongle.rc # 3G Data Card usb modeswitch File #PRODUCT_COPY_FILES += \ # $(call find-copy-subdir-files,*,device/softwinner/polaris-common/rild/usb_modeswitch.d,system/etc/usb_modeswitch.d) PRODUCT_PROPERTY_OVERRIDES += \ ro.sw.embeded.telephony = false PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.timezone=Asia/Shanghai \ persist.sys.language=zh \ persist.sys.country=CN PRODUCT_PACKAGES += Bluetooth #PRODUCT_PROPERTY_OVERRIDES += \ # ro.product.8723b_bt.used=true #GPS Feature #PRODUCT_PACKAGES += gps.polaris #BOARD_USES_GPS_TYPE := simulator #PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml # evb logger PRODUCT_COPY_FILES += \ device/softwinner/astar-y3/tools/logger.sh:system/bin/logger.sh PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 ro.udisk.lable=Polaris \ ro.font.scale=1.0 \ ro.hwa.force=false \ rw.logger=0 \ ro.sys.bootfast=true \ debug.hwc.showfps=0 \ debug.hwui.render_dirty_regions=false #ro.sys.storage_type = emulated \ #for gms #PRODUCT_PROPERTY_OVERRIDES += \ # ro.sys.mutedrm=true \ # ro.adb.secure=1 PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=213 \ ro.product.firmware=v2.0 $(call inherit-product-if-exists, device/softwinner/astar-y3/modules/modules.mk) DEVICE_PACKAGE_OVERLAYS := device/softwinner/astar-y3/overlay PRODUCT_CHARACTERISTICS := tablet # Overrides PRODUCT_AAPT_CONFIG := xlarge hdpi xhdpi large PRODUCT_AAPT_PREF_CONFIG := xhdpi PRODUCT_BRAND := Allwinner PRODUCT_NAME := astar_y3 PRODUCT_DEVICE := astar-y3 PRODUCT_MODEL := QUAD-CORE A33 y3 PRODUCT_MANUFACTURER := softwinner #include device/softwinner/polaris-common/prebuild/google/products/gms_base.mk 4、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\BoardConfig.mk # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration #BOARD_WIFI_VENDOR := realtek ifeq ($(BOARD_WIFI_VENDOR), realtek) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl SW_BOARD_USR_WIFI := rtl8188eu BOARD_WLAN_DEVICE := rtl8188eu #SW_BOARD_USR_WIFI := rtl8723au #BOARD_WLAN_DEVICE := rtl8723au #SW_BOARD_USR_WIFI := rtl8723bs #BOARD_WLAN_DEVICE := rtl8723bs endif # 1.2 broadcom wifi support BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" #SW_BOARD_USR_WIFI := AP6181 #SW_BOARD_USR_WIFI := AP6210 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40181a2.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40181a2_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40181a2_apsta.bin" # 2017/6/21 15:11 wenyuanbo configure ap6212 use ap6210 SW_BOARD_USR_WIFI := AP6212 WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm43438a0.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm43438a0_p2p.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm43438a0_apsta.bin" #SW_BOARD_USR_WIFI := AP6330 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40183b2_ag.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40183b2_ag_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40183b2_ag_apsta.bin" endif #1.3 eag wifi config #BOARD_WIFI_VENDOR := eagle ifeq ($(BOARD_WIFI_VENDOR), eagle) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_eagle BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_eagle SW_BOARD_USR_WIFI := esp8089 BOARD_WLAN_DEVICE := esp8089 endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor BOARD_HAVE_BLUETOOTH := true BOARD_HAVE_BLUETOOTH_BCM := true #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6210 SW_BOARD_HAVE_BLUETOOTH_NAME := ap6212 #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6330 #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #SW_BOARD_HAVE_BLUETOOTH_NAME := rtl8723bs 5、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\init.sun8i.rc on early-fs mount_all /fstab.sun8i setprop ro.crypto.fuse_sdcard true insmod /system/vendor/modules/disp.ko insmod /system/vendor/modules/lcd.ko insmod /system/vendor/modules/mali.ko insmod /system/vendor/modules/leds-sunxi.ko insmod /system/vendor/modules/bcmdhd.ko insmod /system/vendor/modules/bcm_btlpm.ko #2G or 3G init.rc # import init.sunxi.3gdongle.rc ## 1. realtek & eagle wifi service ## 1.1 realtek & eagle wifi sta service #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 1.2 realtek & eagle wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -e/data/misc/wifi/entropy.bin -N \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -g@android:wpa_wlan0 # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # 2. broadcom wifi service # 2.1 broadcom wifi station and softap service wpa_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 2.2 broadcom wifi sta p2p concurrent service service p2p_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets -N \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -I/system/etc/wifi/p2p_supplicant_overlay.conf \ -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot 6、（不需要修改） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\ueventd.sun8i.rc 7、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml 1800000 true 8、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\services\java\com\android\server\BatteryService.java // private static final boolean DEBUG = false; private static final boolean DEBUG = true; private void sendIntentLocked() { // Pack up the values and broadcast them to everyone final Intent intent = new Intent(Intent.ACTION_BATTERY_CHANGED); intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY | Intent.FLAG_RECEIVER_REPLACE_PENDING); int icon = getIconLocked(mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_STATUS, mBatteryProps.batteryStatus); intent.putExtra(BatteryManager.EXTRA_HEALTH, mBatteryProps.batteryHealth); intent.putExtra(BatteryManager.EXTRA_PRESENT, mBatteryProps.batteryPresent); //intent.putExtra(BatteryManager.EXTRA_LEVEL, mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_LEVEL, 100); intent.putExtra(BatteryManager.EXTRA_SCALE, BATTERY_SCALE); intent.putExtra(BatteryManager.EXTRA_ICON_SMALL, icon); intent.putExtra(BatteryManager.EXTRA_PLUGGED, mPlugType); //intent.putExtra(BatteryManager.EXTRA_VOLTAGE, mBatteryProps.batteryVoltage); intent.putExtra(BatteryManager.EXTRA_VOLTAGE, 4200); intent.putExtra(BatteryManager.EXTRA_TEMPERATURE, mBatteryProps.batteryTemperature); intent.putExtra(BatteryManager.EXTRA_TECHNOLOGY, mBatteryProps.batteryTechnology); intent.putExtra(BatteryManager.EXTRA_INVALID_CHARGER, mInvalidCharger); if (DEBUG) { Slog.d(TAG, "2016/12/05 10:41 wenyuanbo **** Sending ACTION_BATTERY_CHANGED. level:" + mBatteryProps.batteryLevel + ", scale:" + BATTERY_SCALE + ", status:" + mBatteryProps.batteryStatus + ", health:" + mBatteryProps.batteryHealth + ", present:" + mBatteryProps.batteryPresent + ", voltage: " + mBatteryProps.batteryVoltage + ", temperature: " + mBatteryProps.batteryTemperature + ", technology: " + mBatteryProps.batteryTechnology + ", AC powered:" + mBatteryProps.chargerAcOnline + ", USB powered:" + mBatteryProps.chargerUsbOnline + ", Wireless powered:" + mBatteryProps.chargerWirelessOnline + ", icon:" + icon + ", invalid charger:" + mInvalidCharger); } mHandler.post(new Runnable() { @Override public void run() { ActivityManagerNative.broadcastStickyIntent(intent, null, UserHandle.USER_ALL); } }); } 9、（直接拷贝同目录下的ap6210：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\Android.mk LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE := bt_vendor.conf LOCAL_MODULE_CLASS := ETC LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth LOCAL_MODULE_TAGS := eng LOCAL_SRC_FILES := $(LOCAL_MODULE) include $(BUILD_PREBUILT) R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\bt_vendor.conf # UART device port where Bluetooth controller is attached UartPort = /dev/ttyS1 # Firmware patch file location FwPatchFilePath = /system/vendor/modules/ # Firmware Name FwPatchFileName = bcm43438a0.hcd 10、新增：vnd_astar-y3-ap6212.txt，直接拷贝：vnd_astar-y2-ap6210.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y3-ap6212.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y2-ap6210.txt BLUETOOTH_UART_DEVICE_PORT = "/dev/ttyS1" FW_PATCHFILE_LOCATION = "/system/vendor/modules/" LPM_IDLE_TIMEOUT_MULTIPLE = 5 UART_TARGET_BAUD_RATE = 1500000 BT_WAKE_VIA_PROC = TRUE #LPM_SLEEP_MODE = FALSE BTVND_DBG = TRUE BTHW_DBG = TRUE VNDUSERIAL_DBG = TRUE UPIO_DBG = TRUE 11、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\src\userial_vendor.c //#ifdef USE_AP6210_BT_MODULE #if defined(USE_AP6210_BT_MODULE) || defined(USE_AP6212_BT_MODULE) /* PATCH for AP6210. Will detect CTS(module side) to select transport mode*/ ALOGE("userial vendor open: USE AP6210 BT MODULE."); usleep(100000); close(vnd_userial.fd); if ((vnd_userial.fd = open(vnd_userial.port_name, O_RDWR)) == -1) { ALOGE("userial vendor open: unable to open %s", vnd_userial.port_name); return -1; } #endif //USE_AP6210_BT_MODULE 12、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\Android.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) LOCAL_CFLAGS += -DUSE_AP6210_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) LOCAL_CFLAGS += -DUSE_AP6212_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6330) include $(LOCAL_PATH)/conf/softwinner/ap6330/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) include $(LOCAL_PATH)/conf/softwinner/ap6210/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) include $(LOCAL_PATH)/conf/softwinner/ap6212/Android.mk endif 13、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\vnd_buildcfg.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6210.txt,$(basename $(TARGET_DEVICE)))) endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6212.txt,$(basename $(TARGET_DEVICE)))) endif 14、（这些AP6212的WIFI的bin文件和BT的hcd文件来自全志R16的SDK，当然也可以找正基原厂/代理商索取：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\bcm43438a0.hcd （根据ap6210修改：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\device-bcm.mk # # Copyright (C) 2008 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ######################## -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0.bin:system/vendor/modules/fw_bcm43438a0.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_apsta.bin:system/vendor/modules/fw_bcm43438a0_apsta.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_p2p.bin:system/vendor/modules/fw_bcm43438a0_p2p.bin \ hardware/broadcom/wlan/firmware/ap6212/nvram_ap6212.txt:system/vendor/modules/nvram_ap6212.txt \ hardware/broadcom/wlan/firmware/ap6212/bcm43438a0.hcd:system/vendor/modules/bcm43438a0.hcd #hardware/broadcom/wlan/firmware/ap6212/config.txt:system/vendor/modules/config.txt ######################## R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_apsta.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_p2p.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\nvram_ap6212.txt 15、（可选修改：） R:\wyb\ap6212a0_a33_sc3817r\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java private BroadcastReceiver mBatteryInfoReceiver = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { String action = intent.getAction(); if (Intent.ACTION_BATTERY_CHANGED.equals(action)) { int Level = intent.getIntExtra("level", 0); int Scale = intent.getIntExtra("scale", 100); Log.w(TAG, "2016/11/29 19:54 &&&& wenyuanbo battery Level" + Level); /* *Logic: *1.the battery level is lower then 5%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, give a dialog, press it and finish the activity. *5.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, also give a dialog for finishing the activity. * *by fuqiang. */ if(Level < 5) { Runnable runnable_close_camera = new Runnable() { @Override public void run() { //close the camera. // CameraActivity.this.finish(); } }; Log.w(TAG, "2016/11/29 18:20 **** wenyuanbo battery Level" + Level); showLocationDialog(); } /* *Logic: *1.the battery level is lhigher then 5% and lower than 15%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.whether in camera or in videocamera, make sure that the flash mode is supported. *5.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, forbidden the flash(gray icon), give a dialog to notise user. *6.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, forbidden the flash and give a notice dialog. *7.the dialog is only given once for each camera activity starting. * *by fuqiang. */ else if(Level < 16) { //close the flash mode. /* if (mIsLowBatteryDialogShown == false) { mRotateDialog.showAlertDialog( getString(R.string.warning), getString(R.string.low_battery_15), null, null, getString(R.string.close), null); mIsLowBatteryDialogShown = true; } */ } } } }; 16、（可选：） R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg bootdelay=3 loglevel=8 17、 R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\y3\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 ;---------------------------------------------------------------------------------- ;uart configuration ;uart_used = uart x enable ;uart_type = 2:2 wire,4:4 wire,8:8 wire, full function ;---------------------------------------------------------------------------------- [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02<3><1> uart_rx = port:PF04<3><1> [uart1] uart_used = 1 uart_port = 1 uart_type = 4 uart_tx = port:PG06<2><1> uart_rx = port:PG07<2><1> uart_rts = port:PG08<2><1> uart_cts = port:PG09<2><1> [uart2] uart_used = 1 uart_type = 4 uart_tx = port:PB00<2><1> uart_rx = port:PB01<2><1> uart_rts = port:PB02<2><1> uart_cts = port:PB03<2><1> [uart3] uart_used = 0 uart_type = 4 uart_tx = port:PH06<3><1> uart_rx = port:PH07<3><1> uart_rts = port:PH08<3><1> uart_cts = port:PH09<3><1> [uart4] uart_used = 0 uart_port = 4 uart_type = 2 uart_tx = port:PA04<2><1> uart_rx = port:PA05<2><1> uart_rts = port:PA06<2><1> uart_cts = port:PA07<2><1> ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04<4> ctp_wakeup = port:PL03<1><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;-------------------------------------------------------------------------------- ; CTP automatic detection configuration ;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused ;Module name postposition 1 said detection, 0 means no detection. ;-------------------------------------------------------------------------------- [ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0 [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13<1><0><1> ;ap6xxx_wl_regon = port:PL06<1><0> ;lcd_bl_en = port:PL06<1><0><1> lcd_power = "axp22_dc1sw" lcdd0 = port:PD18<3><0> lcdd1 = port:PD19<3><0> lcdd2 = port:PD20<3><0> lcdd3 = port:PD21<3><0> lcdd4 = port:PD22<3><0> lcdd5 = port:PD23<3><0> lcdd6 = port:PD24<3><0> lcdd7 = port:PD25<3><0> lcdd8 = port:PD26<3><0> lcdd9 = port:PD27<3><0> ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0> [pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0> ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wifi_mod_sel: 0- none, 1- ap6181, 2- ap6210(wifi+bt), ; 3 - rtl8188eu, 4- rtl8723au(wifi+bt), ; 5 - rtl8723bs, 6- esp8089 ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 2 wifi_power = "axp22_dldo1" wifi_power_ext1 = "axp22_dldo2" wifi_power_ext2 = "axp22_aldo1" wifi_power_switch = ;wifi_power_switch = port:power0<1><0><0> ; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><0> ;ap6xxx_wl_host_wake = port:PL07<4><0> ;ap6xxx_lpo_use_apclk = 1 ; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06<1><0> ;ap6xxx_wl_regon = port:PD13<1><0> ap6xxx_wl_host_wake = port:PL07<4><0> ap6xxx_bt_regon = port:PL08<1><0> ap6xxx_bt_wake = port:PL10<1><0> ap6xxx_bt_host_wake = port:PL09<4><0> ap6xxx_lpo_use_apclk = 1 ; 3 - rtl8188eu usb wifi gpio conifg ; 4 - rtl8723au usb wifi + bt ; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11<1><0> ;rtl8723bs_wl_regon = port:PL06<1><0> ;rtl8723bs_wl_host_wake = port:PL07<4><0> ;rtl8723bs_bt_regon = port:PL08<1><0> ;rtl8723bs_bt_wake = port:PL10<1><0> ;rtl8723bs_bt_host_wake = port:PL09<4><0> ;rtl8723bs_lpo_use_apclk = 0 ; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03<1><0> ;esp_wl_rst = port:PL02<1><0> ;-------------------------------------------------------------------------------- ;blue tooth ;bt_used ---- blue tooth used (0- no used, 1- used) ;bt_uard_id ---- uart index ;-------------------------------------------------------------------------------- [bt_para] bt_used = 1 bt_uart_id = 1 power_start = 3 pmu_temp_enable = 0 18、刷机之后，BT可以用。传输4.5MB的JPG图片大概需要2分钟。 WIFI：在设置→WLAN（打开之后）： shell@astar-y3:/ $ shell@astar-y3:/ $ [ 469.609956] init: computing context for service '/system/bin/wpa_supplicant' [ 469.618386] init: starting 'p2p_supplicant' [ 469.625739] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 469.673379] init: waitpid returned pid 2065, status = 0000ff00 [ 469.679923] init: process 'p2p_supplicant', pid 2065 exited [ 476.197334] sndpcm_unmute,line:1099 [ 451.464755] CPU1: Booted secondary processor [ 478.459403] CPU1: shutdown [ 478.462947] [hotplug]: cpu(0) try to kill cpu(1) [ 478.468478] [hotplug]: cpu1 is killed! . shell@astar-y3:/ $ 分析启动的log： [ 17.526849] gpio ap6xxx_wl_regon set val 1, act val 1 [ 17.632508] [ap6xxx]: sdio wifi power state: on [ 17.637576] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.637751] =========== WLAN placed in POWER ON ======== [ 17.654651] [mmc]: sdc1 card_power_on start... [ 17.659576] [mmc]: sdc1 power_supply is null [ 17.664322] [mmc]: sdc1 card_power_on ok [ 17.680039] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.690275] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.772361] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.781309] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.799714] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.862032] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.872262] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.933953] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 17.941997] *******************Try sdio******************* [ 17.948400] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.958630] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.027775] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 18.035416] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.043087] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.051920] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 18.145287] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.155436] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.215346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.225736] [mmc]: mclk 0xf1c2008c 0x8100000b [ 18.285675] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 18.296021] [mmc]: mclk 0xf1c2008c 0x8140030b [ 18.357915] mmc1: new high speed SDIO card at address 0001 [ 18.364532] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 18.364575] *******************sdio init ok******************* [ 18.377207] bcm_wlan_get_oob_irq enter. [ 18.381537] gpio [359] map to virq [7] ok [ 18.388851] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 18.396019] dhdsdio_probe_attach: unsupported chip: 0xa9a6 [ 18.402155] dhdsdio_probe: dhdsdio_probe_attach failed [ 18.407899] bcmsdh_probe: device attach failed [ 18.412981] [ 18.412984] Dongle Host Driver, version 1.88.45.3 (r420671) [ 18.412989] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 12:06:39 [ 18.428835] dhd_module_init: sdio_register_driver timeout or error [ 18.435928] gpio ap6xxx_wl_regon set val 0, act val 0 [ 18.541549] [ap6xxx]: sdio wifi power state: off [ 18.546679] =========== WLAN placed in POWER OFF ======== [ 18.546915] mmc1: card 0001 removed [ 18.546995] [mmc]: mmc not poweroff notifiy [ 18.547007] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 18.547160] [mmc]: sdc1 card_power_off start... [ 18.547166] [mmc]: sdc1 power_supply is null [ 18.547173] [mmc]: sdc1 card_power_off ok [ 18.631655] init: command 'insmod' r=-1 [ 18.636066] init: command 'insmod' r=-1 [ 18.658010] fs_mgr: swapon failed for /dev/block/zram0 [ 18.663804] init: command 'swapon_all' r=-1 [ 18.668504] init: processing action 0x58e70 (console_init) [ 18.675396] init: width = 1280 [ 18.678788] init: height = 800 [ 18.682224] init: s.st_size = 3145728 [ 18.686308] init: logo match failed!fbsize = 4096000 [ 18.718811] init: command 'console_init' r=0 [ 18.723628] init: processing action 0x55bf0 (fs) [ 18.730640] init: command 'mkdir' r=-2 [ 18.741901] init: command 'insmod' r=0 [ 18.752227] init: command 'insmod' r=0 [ 18.756491] init: command 'insmod' r=-1 [ 18.771211] init: command 'insmod' r=0 [ 18.779731] init: command 'insmod' r=0 [ 18.791739] init: command 'insmod' r=0 [ 18.803941] init: command 'insmod' r=0 [ 18.816178] init: command 'insmod' r=0 19、查找：（dhdsdio_probe_attach: unsupported chip: 0xa9a6） rootroot@rootroot-E400:~$ cd wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "unsupported chip" . -R ./dhd_sdio.c: DHD_ERROR(("%s: unsupported chip: 0xx\n", ./sbutils.c: SI_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko 匹配到二进制文件 ./sbutils.o rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$

调通sina33下的AP6212A0版本的BT 大文实验室/大文哥壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/6/26 11:01 版本：V1.0 本文参照：《A33 wifi移植说明书.pdf》还有就是全志R16的parrotv1.1的官方SDK（Android4.4.2） 1、打开AP6212的BT，关闭rtl8723bs的BT： [ 3.141273] Bluetooth: HCI UART driver ver 2.2 [ 3.146210] Bluetooth: HCI H4 protocol initialized [ 3.151563] Bluetooth: HCI BCSP protocol initialized [ 3.157154] usbcore: registered new interface driver btusb [ 3.163282] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.169599] Bluetooth: BlueSleep Mode Driver Ver 1.1 [ 3.175402] Bluetooth: get rtl8723bs rtl8723bs_bt_host_wake gpio failed [ 3.953017] Bluetooth: RFCOMM TTY layer initialized [ 3.958456] Bluetooth: RFCOMM socket layer initialized [ 3.964183] Bluetooth: RFCOMM ver 1.11 [ 3.968340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.968638] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.968734] [mmc]: mclk 0xf1c20090 0xc100000b [ 3.989421] Bluetooth: BNEP filters: protocol multicast [ 3.995242] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.001921] L2TP core driver, V2.0 [ 4.005706] PPPoL2TP kernel driver, V2.0 [ 4.010070] L2TP IP encapsulation support (L2TPv3) [ 4.015468] L2TP netlink interface [ 4.019264] L2TP ethernet pseudowire support (L2TPv3) [ 4.023860] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B [ 4.023929] [mmc]: mclk 0xf1c20090 0xc100000b [ 4.040272] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 4.048780] ThumbEE CPU extension supported. [ 4.053550] Registering SWP/SWPB emulation handler [ 4.059269] [rfkill]: rfkill set power 1 [ 4.063652] gpio ap6xxx_bt_regon set val 0, act val 0 正常启动的BT加载： [ 3.207764] Bluetooth: HCI UART driver ver 2.2 [ 3.212725] Bluetooth: HCI H4 protocol initialized [ 3.218045] Bluetooth: HCI BCSP protocol initialized [ 3.223671] usbcore: registered new interface driver btusb [ 3.229766] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.236243] Bluetooth: MSM Sleep Mode Driver Ver 1.2 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r$ ll rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4$ make ARCH=arm menuconfig [*] Networking support ---> Bluetooth subsystem support ---> Bluetooth device drivers ---> Broadcom Bluetooth Low Power Manager Support Realtek Bluesleep driver support 修改为： Broadcom Bluetooth Low Power Manager Support An inverter between bt hostwake pin and cpu (NEW) Realtek Bluesleep driver support 2、（这个不修改：） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\overlay\frameworks\base\core\res\res\values\config.xml "wlan0" "bt-pan" 3、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\astar_y3.mk # ap6181/6210/6330 sdio wifi fw and nvram #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6181/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6210/device-bcm.mk) $(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6212/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6330/device-bcm.mk) #rtl8723bs bt fw and config #$(call inherit-product, hardware/realtek/bluetooth/rtl8723bs/firmware/rtlbtfw_cfg.mk) # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-y3/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini #add gms features #PRODUCT_COPY_FILES += \ # frameworks/native/data/etc/android.hardware.faketouch.xml:system/etc/permissions/android.hardware.faketouch.xml \ # frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ # frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml # 3G Data Card Packages #PRODUCT_PACKAGES += \ # u3gmonitor \ # chat \ # rild \ # pppd # 3G Data Card Configuration Flie #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/ip-down:system/etc/ppp/ip-down \ # device/softwinner/polaris-common/rild/ip-up:system/etc/ppp/ip-up \ # device/softwinner/polaris-common/rild/3g_dongle.cfg:system/etc/3g_dongle.cfg \ # device/softwinner/polaris-common/rild/usb_modeswitch:system/bin/usb_modeswitch \ # device/softwinner/polaris-common/rild/call-pppd:system/xbin/call-pppd \ # device/softwinner/polaris-common/rild/usb_modeswitch.sh:system/xbin/usb_modeswitch.sh \ # device/softwinner/polaris-common/rild/apns-conf_sdk.xml:system/etc/apns-conf.xml \ # device/softwinner/polaris-common/rild/libsoftwinner-ril.so:system/lib/libsoftwinner-ril.so #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/init.3gdongle.rc:root/init.sunxi.3gdongle.rc # 3G Data Card usb modeswitch File #PRODUCT_COPY_FILES += \ # $(call find-copy-subdir-files,*,device/softwinner/polaris-common/rild/usb_modeswitch.d,system/etc/usb_modeswitch.d) PRODUCT_PROPERTY_OVERRIDES += \ ro.sw.embeded.telephony = false PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.timezone=Asia/Shanghai \ persist.sys.language=zh \ persist.sys.country=CN PRODUCT_PACKAGES += Bluetooth #PRODUCT_PROPERTY_OVERRIDES += \ # ro.product.8723b_bt.used=true #GPS Feature #PRODUCT_PACKAGES += gps.polaris #BOARD_USES_GPS_TYPE := simulator #PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml # evb logger PRODUCT_COPY_FILES += \ device/softwinner/astar-y3/tools/logger.sh:system/bin/logger.sh PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 ro.udisk.lable=Polaris \ ro.font.scale=1.0 \ ro.hwa.force=false \ rw.logger=0 \ ro.sys.bootfast=true \ debug.hwc.showfps=0 \ debug.hwui.render_dirty_regions=false #ro.sys.storage_type = emulated \ #for gms #PRODUCT_PROPERTY_OVERRIDES += \ # ro.sys.mutedrm=true \ # ro.adb.secure=1 PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=213 \ ro.product.firmware=v2.0 $(call inherit-product-if-exists, device/softwinner/astar-y3/modules/modules.mk) DEVICE_PACKAGE_OVERLAYS := device/softwinner/astar-y3/overlay PRODUCT_CHARACTERISTICS := tablet # Overrides PRODUCT_AAPT_CONFIG := xlarge hdpi xhdpi large PRODUCT_AAPT_PREF_CONFIG := xhdpi PRODUCT_BRAND := Allwinner PRODUCT_NAME := astar_y3 PRODUCT_DEVICE := astar-y3 PRODUCT_MODEL := QUAD-CORE A33 y3 PRODUCT_MANUFACTURER := softwinner #include device/softwinner/polaris-common/prebuild/google/products/gms_base.mk 4、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\BoardConfig.mk # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration #BOARD_WIFI_VENDOR := realtek ifeq ($(BOARD_WIFI_VENDOR), realtek) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl SW_BOARD_USR_WIFI := rtl8188eu BOARD_WLAN_DEVICE := rtl8188eu #SW_BOARD_USR_WIFI := rtl8723au #BOARD_WLAN_DEVICE := rtl8723au #SW_BOARD_USR_WIFI := rtl8723bs #BOARD_WLAN_DEVICE := rtl8723bs endif # 1.2 broadcom wifi support BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" #SW_BOARD_USR_WIFI := AP6181 #SW_BOARD_USR_WIFI := AP6210 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40181a2.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40181a2_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40181a2_apsta.bin" # 2017/6/21 15:11 wenyuanbo configure ap6212 use ap6210 SW_BOARD_USR_WIFI := AP6212 WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm43438a0.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm43438a0_p2p.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm43438a0_apsta.bin" #SW_BOARD_USR_WIFI := AP6330 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40183b2_ag.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40183b2_ag_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40183b2_ag_apsta.bin" endif #1.3 eag wifi config #BOARD_WIFI_VENDOR := eagle ifeq ($(BOARD_WIFI_VENDOR), eagle) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_eagle BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_eagle SW_BOARD_USR_WIFI := esp8089 BOARD_WLAN_DEVICE := esp8089 endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor BOARD_HAVE_BLUETOOTH := true BOARD_HAVE_BLUETOOTH_BCM := true #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6210 SW_BOARD_HAVE_BLUETOOTH_NAME := ap6212 #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6330 #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #SW_BOARD_HAVE_BLUETOOTH_NAME := rtl8723bs 5、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\init.sun8i.rc on early-fs mount_all /fstab.sun8i setprop ro.crypto.fuse_sdcard true insmod /system/vendor/modules/disp.ko insmod /system/vendor/modules/lcd.ko insmod /system/vendor/modules/mali.ko insmod /system/vendor/modules/leds-sunxi.ko insmod /system/vendor/modules/bcmdhd.ko insmod /system/vendor/modules/bcm_btlpm.ko #2G or 3G init.rc # import init.sunxi.3gdongle.rc ## 1. realtek & eagle wifi service ## 1.1 realtek & eagle wifi sta service #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 1.2 realtek & eagle wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -e/data/misc/wifi/entropy.bin -N \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -g@android:wpa_wlan0 # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # 2. broadcom wifi service # 2.1 broadcom wifi station and softap service wpa_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 2.2 broadcom wifi sta p2p concurrent service service p2p_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets -N \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -I/system/etc/wifi/p2p_supplicant_overlay.conf \ -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot 6、（不需要修改） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\ueventd.sun8i.rc 7、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml 1800000 true 8、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\services\java\com\android\server\BatteryService.java // private static final boolean DEBUG = false; private static final boolean DEBUG = true; private void sendIntentLocked() { // Pack up the values and broadcast them to everyone final Intent intent = new Intent(Intent.ACTION_BATTERY_CHANGED); intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY | Intent.FLAG_RECEIVER_REPLACE_PENDING); int icon = getIconLocked(mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_STATUS, mBatteryProps.batteryStatus); intent.putExtra(BatteryManager.EXTRA_HEALTH, mBatteryProps.batteryHealth); intent.putExtra(BatteryManager.EXTRA_PRESENT, mBatteryProps.batteryPresent); //intent.putExtra(BatteryManager.EXTRA_LEVEL, mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_LEVEL, 100); intent.putExtra(BatteryManager.EXTRA_SCALE, BATTERY_SCALE); intent.putExtra(BatteryManager.EXTRA_ICON_SMALL, icon); intent.putExtra(BatteryManager.EXTRA_PLUGGED, mPlugType); //intent.putExtra(BatteryManager.EXTRA_VOLTAGE, mBatteryProps.batteryVoltage); intent.putExtra(BatteryManager.EXTRA_VOLTAGE, 4200); intent.putExtra(BatteryManager.EXTRA_TEMPERATURE, mBatteryProps.batteryTemperature); intent.putExtra(BatteryManager.EXTRA_TECHNOLOGY, mBatteryProps.batteryTechnology); intent.putExtra(BatteryManager.EXTRA_INVALID_CHARGER, mInvalidCharger); if (DEBUG) { Slog.d(TAG, "2016/12/05 10:41 wenyuanbo **** Sending ACTION_BATTERY_CHANGED. level:" + mBatteryProps.batteryLevel + ", scale:" + BATTERY_SCALE + ", status:" + mBatteryProps.batteryStatus + ", health:" + mBatteryProps.batteryHealth + ", present:" + mBatteryProps.batteryPresent + ", voltage: " + mBatteryProps.batteryVoltage + ", temperature: " + mBatteryProps.batteryTemperature + ", technology: " + mBatteryProps.batteryTechnology + ", AC powered:" + mBatteryProps.chargerAcOnline + ", USB powered:" + mBatteryProps.chargerUsbOnline + ", Wireless powered:" + mBatteryProps.chargerWirelessOnline + ", icon:" + icon + ", invalid charger:" + mInvalidCharger); } mHandler.post(new Runnable() { @Override public void run() { ActivityManagerNative.broadcastStickyIntent(intent, null, UserHandle.USER_ALL); } }); } 9、（直接拷贝同目录下的ap6210：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\Android.mk LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE := bt_vendor.conf LOCAL_MODULE_CLASS := ETC LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth LOCAL_MODULE_TAGS := eng LOCAL_SRC_FILES := $(LOCAL_MODULE) include $(BUILD_PREBUILT) R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\bt_vendor.conf # UART device port where Bluetooth controller is attached UartPort = /dev/ttyS1 # Firmware patch file location FwPatchFilePath = /system/vendor/modules/ # Firmware Name FwPatchFileName = bcm43438a0.hcd 10、新增：vnd_astar-y3-ap6212.txt，直接拷贝：vnd_astar-y2-ap6210.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y3-ap6212.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y2-ap6210.txt BLUETOOTH_UART_DEVICE_PORT = "/dev/ttyS1" FW_PATCHFILE_LOCATION = "/system/vendor/modules/" LPM_IDLE_TIMEOUT_MULTIPLE = 5 UART_TARGET_BAUD_RATE = 1500000 BT_WAKE_VIA_PROC = TRUE #LPM_SLEEP_MODE = FALSE BTVND_DBG = TRUE BTHW_DBG = TRUE VNDUSERIAL_DBG = TRUE UPIO_DBG = TRUE 11、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\src\userial_vendor.c //#ifdef USE_AP6210_BT_MODULE #if defined(USE_AP6210_BT_MODULE) || defined(USE_AP6212_BT_MODULE) /* PATCH for AP6210. Will detect CTS(module side) to select transport mode*/ ALOGE("userial vendor open: USE AP6210 BT MODULE."); usleep(100000); close(vnd_userial.fd); if ((vnd_userial.fd = open(vnd_userial.port_name, O_RDWR)) == -1) { ALOGE("userial vendor open: unable to open %s", vnd_userial.port_name); return -1; } #endif //USE_AP6210_BT_MODULE 12、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\Android.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) LOCAL_CFLAGS += -DUSE_AP6210_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) LOCAL_CFLAGS += -DUSE_AP6212_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6330) include $(LOCAL_PATH)/conf/softwinner/ap6330/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) include $(LOCAL_PATH)/conf/softwinner/ap6210/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) include $(LOCAL_PATH)/conf/softwinner/ap6212/Android.mk endif 13、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\vnd_buildcfg.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6210.txt,$(basename $(TARGET_DEVICE)))) endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6212.txt,$(basename $(TARGET_DEVICE)))) endif 14、（这些AP6212的WIFI的bin文件和BT的hcd文件来自全志R16的SDK，当然也可以找正基原厂/代理商索取：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\bcm43438a0.hcd （根据ap6210修改：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\device-bcm.mk # # Copyright (C) 2008 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ######################## -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0.bin:system/vendor/modules/fw_bcm43438a0.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_apsta.bin:system/vendor/modules/fw_bcm43438a0_apsta.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_p2p.bin:system/vendor/modules/fw_bcm43438a0_p2p.bin \ hardware/broadcom/wlan/firmware/ap6212/nvram_ap6212.txt:system/vendor/modules/nvram_ap6212.txt \ hardware/broadcom/wlan/firmware/ap6212/bcm43438a0.hcd:system/vendor/modules/bcm43438a0.hcd #hardware/broadcom/wlan/firmware/ap6212/config.txt:system/vendor/modules/config.txt ######################## R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_apsta.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_p2p.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\nvram_ap6212.txt 15、（可选修改：） R:\wyb\ap6212a0_a33_sc3817r\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java private BroadcastReceiver mBatteryInfoReceiver = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { String action = intent.getAction(); if (Intent.ACTION_BATTERY_CHANGED.equals(action)) { int Level = intent.getIntExtra("level", 0); int Scale = intent.getIntExtra("scale", 100); Log.w(TAG, "2016/11/29 19:54 &&&& wenyuanbo battery Level" + Level); /* *Logic: *1.the battery level is lower then 5%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, give a dialog, press it and finish the activity. *5.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, also give a dialog for finishing the activity. * *by fuqiang. */ if(Level < 5) { Runnable runnable_close_camera = new Runnable() { @Override public void run() { //close the camera. // CameraActivity.this.finish(); } }; Log.w(TAG, "2016/11/29 18:20 **** wenyuanbo battery Level" + Level); showLocationDialog(); } /* *Logic: *1.the battery level is lhigher then 5% and lower than 15%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.whether in camera or in videocamera, make sure that the flash mode is supported. *5.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, forbidden the flash(gray icon), give a dialog to notise user. *6.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, forbidden the flash and give a notice dialog. *7.the dialog is only given once for each camera activity starting. * *by fuqiang. */ else if(Level < 16) { //close the flash mode. /* if (mIsLowBatteryDialogShown == false) { mRotateDialog.showAlertDialog( getString(R.string.warning), getString(R.string.low_battery_15), null, null, getString(R.string.close), null); mIsLowBatteryDialogShown = true; } */ } } } }; 16、（可选：） R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg bootdelay=3 loglevel=8 17、 R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\y3\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 ;---------------------------------------------------------------------------------- ;uart configuration ;uart_used = uart x enable ;uart_type = 2:2 wire,4:4 wire,8:8 wire, full function ;---------------------------------------------------------------------------------- [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02 uart_rx = port:PF04 [uart1] uart_used = 1 uart_port = 1 uart_type = 4 uart_tx = port:PG06 uart_rx = port:PG07 uart_rts = port:PG08 uart_cts = port:PG09 [uart2] uart_used = 1 uart_type = 4 uart_tx = port:PB00 uart_rx = port:PB01 uart_rts = port:PB02 uart_cts = port:PB03 [uart3] uart_used = 0 uart_type = 4 uart_tx = port:PH06 uart_rx = port:PH07 uart_rts = port:PH08 uart_cts = port:PH09 [uart4] uart_used = 0 uart_port = 4 uart_type = 2 uart_tx = port:PA04 uart_rx = port:PA05 uart_rts = port:PA06 uart_cts = port:PA07 ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04 ctp_wakeup = port:PL03 ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;-------------------------------------------------------------------------------- ; CTP automatic detection configuration ;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused ;Module name postposition 1 said detection, 0 means no detection. ;-------------------------------------------------------------------------------- [ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0 [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13 ;ap6xxx_wl_regon = port:PL06 ;lcd_bl_en = port:PL06 lcd_power = "axp22_dc1sw" lcdd0 = port:PD18 lcdd1 = port:PD19 lcdd2 = port:PD20 lcdd3 = port:PD21 lcdd4 = port:PD22 lcdd5 = port:PD23 lcdd6 = port:PD24 lcdd7 = port:PD25 lcdd8 = port:PD26 lcdd9 = port:PD27 ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00 [pwm1_para] pwm_used = 1 pwm_positive = port:PH01 ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wifi_mod_sel: 0- none, 1- ap6181, 2- ap6210(wifi+bt), ; 3 - rtl8188eu, 4- rtl8723au(wifi+bt), ; 5 - rtl8723bs, 6- esp8089 ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 2 wifi_power = "axp22_dldo1" wifi_power_ext1 = "axp22_dldo2" wifi_power_ext2 = "axp22_aldo1" wifi_power_switch = ;wifi_power_switch = port:power0 ; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06 ;ap6xxx_wl_host_wake = port:PL07 ;ap6xxx_lpo_use_apclk = 1 ; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06 ;ap6xxx_wl_regon = port:PD13 ap6xxx_wl_host_wake = port:PL07 ap6xxx_bt_regon = port:PL08 ap6xxx_bt_wake = port:PL10 ap6xxx_bt_host_wake = port:PL09 ap6xxx_lpo_use_apclk = 1 ; 3 - rtl8188eu usb wifi gpio conifg ; 4 - rtl8723au usb wifi + bt ; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11 ;rtl8723bs_wl_regon = port:PL06 ;rtl8723bs_wl_host_wake = port:PL07 ;rtl8723bs_bt_regon = port:PL08 ;rtl8723bs_bt_wake = port:PL10 ;rtl8723bs_bt_host_wake = port:PL09 ;rtl8723bs_lpo_use_apclk = 0 ; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03 ;esp_wl_rst = port:PL02 ;-------------------------------------------------------------------------------- ;blue tooth ;bt_used ---- blue tooth used (0- no used, 1- used) ;bt_uard_id ---- uart index ;-------------------------------------------------------------------------------- [bt_para] bt_used = 1 bt_uart_id = 1 power_start = 3 pmu_temp_enable = 0 18、刷机之后，BT可以用。传输4.5MB的JPG图片大概需要2分钟。 WIFI：在设置→WLAN（打开之后）： shell@astar-y3:/ $ shell@astar-y3:/ $ [ 469.609956] init: computing context for service '/system/bin/wpa_supplicant' [ 469.618386] init: starting 'p2p_supplicant' [ 469.625739] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 469.673379] init: waitpid returned pid 2065, status = 0000ff00 [ 469.679923] init: process 'p2p_supplicant', pid 2065 exited [ 476.197334] sndpcm_unmute,line:1099 [ 451.464755] CPU1: Booted secondary processor [ 478.459403] CPU1: shutdown [ 478.462947] [hotplug]: cpu(0) try to kill cpu(1) [ 478.468478] [hotplug]: cpu1 is killed! . shell@astar-y3:/ $ 分析启动的log： [ 17.526849] gpio ap6xxx_wl_regon set val 1, act val 1 [ 17.632508] [ap6xxx]: sdio wifi power state: on [ 17.637576] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.637751] =========== WLAN placed in POWER ON ======== [ 17.654651] [mmc]: sdc1 card_power_on start... [ 17.659576] [mmc]: sdc1 power_supply is null [ 17.664322] [mmc]: sdc1 card_power_on ok [ 17.680039] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.690275] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.772361] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.781309] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.799714] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.862032] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.872262] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.933953] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 17.941997] *******************Try sdio******************* [ 17.948400] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.958630] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.027775] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 18.035416] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.043087] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.051920] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 18.145287] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.155436] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.215346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.225736] [mmc]: mclk 0xf1c2008c 0x8100000b [ 18.285675] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 18.296021] [mmc]: mclk 0xf1c2008c 0x8140030b [ 18.357915] mmc1: new high speed SDIO card at address 0001 [ 18.364532] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 18.364575] *******************sdio init ok******************* [ 18.377207] bcm_wlan_get_oob_irq enter. [ 18.381537] gpio [359] map to virq [7] ok [ 18.388851] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 18.396019] dhdsdio_probe_attach: unsupported chip: 0xa9a6 [ 18.402155] dhdsdio_probe: dhdsdio_probe_attach failed [ 18.407899] bcmsdh_probe: device attach failed [ 18.412981] [ 18.412984] Dongle Host Driver, version 1.88.45.3 (r420671) [ 18.412989] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 12:06:39 [ 18.428835] dhd_module_init: sdio_register_driver timeout or error [ 18.435928] gpio ap6xxx_wl_regon set val 0, act val 0 [ 18.541549] [ap6xxx]: sdio wifi power state: off [ 18.546679] =========== WLAN placed in POWER OFF ======== [ 18.546915] mmc1: card 0001 removed [ 18.546995] [mmc]: mmc not poweroff notifiy [ 18.547007] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 18.547160] [mmc]: sdc1 card_power_off start... [ 18.547166] [mmc]: sdc1 power_supply is null [ 18.547173] [mmc]: sdc1 card_power_off ok [ 18.631655] init: command 'insmod' r=-1 [ 18.636066] init: command 'insmod' r=-1 [ 18.658010] fs_mgr: swapon failed for /dev/block/zram0 [ 18.663804] init: command 'swapon_all' r=-1 [ 18.668504] init: processing action 0x58e70 (console_init) [ 18.675396] init: width = 1280 [ 18.678788] init: height = 800 [ 18.682224] init: s.st_size = 3145728 [ 18.686308] init: logo match failed!fbsize = 4096000 [ 18.718811] init: command 'console_init' r=0 [ 18.723628] init: processing action 0x55bf0 (fs) [ 18.730640] init: command 'mkdir' r=-2 [ 18.741901] init: command 'insmod' r=0 [ 18.752227] init: command 'insmod' r=0 [ 18.756491] init: command 'insmod' r=-1 [ 18.771211] init: command 'insmod' r=0 [ 18.779731] init: command 'insmod' r=0 [ 18.791739] init: command 'insmod' r=0 [ 18.803941] init: command 'insmod' r=0 [ 18.816178] init: command 'insmod' r=0 19、查找：（dhdsdio_probe_attach: unsupported chip: 0xa9a6） rootroot@rootroot-E400:~$ cd wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "unsupported chip" . -R ./dhd_sdio.c: DHD_ERROR(("%s: unsupported chip: 0xx\n", ./sbutils.c: SI_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko 匹配到二进制文件 ./sbutils.o rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ 经过确认： R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_sdio.c static bool dhdsdio_probe_attach(struct dhd_bus *bus, osl_t *osh, void *sdh, void *regsva, uint16 devid) { …… bcmsdh_chipinfo(sdh, bus->sih->chip, bus->sih->chiprev); if (!dhdsdio_chipmatch((uint16)bus->sih->chip)) { DHD_ERROR(("%s: unsupported chip: 0xx\n", __FUNCTION__, bus->sih->chip)); goto fail; } …… } 继续追踪： static bool dhdsdio_chipmatch(uint16 chipid) { if (chipid == BCM4325_CHIP_ID) return TRUE; if (chipid == BCM4329_CHIP_ID) return TRUE; if (chipid == BCM4315_CHIP_ID) return TRUE; if (chipid == BCM4319_CHIP_ID) return TRUE; if (chipid == BCM4336_CHIP_ID) return TRUE; if (chipid == BCM4330_CHIP_ID) return TRUE; if (chipid == BCM43237_CHIP_ID) return TRUE; if (chipid == BCM43362_CHIP_ID) return TRUE; if (chipid == BCM4314_CHIP_ID) return TRUE; if (chipid == BCM43242_CHIP_ID) return TRUE; if (chipid == BCM43340_CHIP_ID) return TRUE; if (chipid == BCM43341_CHIP_ID) return TRUE; if (chipid == BCM43143_CHIP_ID) return TRUE; if (chipid == BCM43342_CHIP_ID) return TRUE; if (chipid == BCM4334_CHIP_ID) return TRUE; if (chipid == BCM43239_CHIP_ID) return TRUE; if (chipid == BCM4324_CHIP_ID) return TRUE; if (chipid == BCM4335_CHIP_ID) return TRUE; if (chipid == BCM4339_CHIP_ID) return TRUE; if (chipid == BCM43349_CHIP_ID) return TRUE; if (chipid == BCM4345_CHIP_ID) return TRUE; if (chipid == BCM4350_CHIP_ID) return TRUE; if (chipid == BCM4354_CHIP_ID) return TRUE; if (chipid == BCM4356_CHIP_ID) return TRUE; if (chipid == BCM4358_CHIP_ID) return TRUE; if (chipid == BCM4371_CHIP_ID) return TRUE; if (chipid == BCM43430_CHIP_ID) return TRUE; if (BCM4349_CHIP(chipid)) return TRUE; return FALSE; } 20、 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ll 总用量 40 drwxr-xr-x 7 rootroot rootroot 4096 6月 26 12:02 ./ drwx------ 6 rootroot rootroot 4096 6月 26 14:16 ../ drwxr-xr-x 10 rootroot rootroot 4096 9月 4 2014 brandy/ -rw-rw-r-- 1 rootroot rootroot 116 6月 26 12:02 .buildconfig drwxr-xr-x 15 rootroot rootroot 4096 9月 4 2014 buildroot/ -r-xr-xr-x 1 rootroot rootroot 55 9月 4 2014 build.sh* drwxr-xr-x 28 rootroot rootroot 4096 6月 26 14:30 linux-3.4/ drwxrwxr-x 3 rootroot rootroot 4096 6月 26 12:02 out/ -r--r--r-- 1 rootroot rootroot 232 9月 4 2014 README drwxr-xr-x 7 rootroot rootroot 4096 6月 7 19:33 tools/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh INFO: ---------------------------------------- INFO: build lichee ... INFO: chip: sun8iw5p1 INFO: platform: android INFO: kernel: linux-3.4 INFO: board: y3 INFO: output: out/sun8iw5p1/android/y3 INFO: ---------------------------------------- INFO: build buildroot ... external toolchain has been installed INFO: build buildroot OK. INFO: build kernel ... INFO: prepare toolchain ... Building kernel CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: “include/generated/mach-types.h”是最新的。 CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC arch/arm/mach-sunxi/pm/standby/common.o CC arch/arm/mach-sunxi/pm/standby/standby_clock.o CC arch/arm/mach-sunxi/pm/standby/standby_ir.o CC arch/arm/mach-sunxi/pm/standby/standby_key.o CC arch/arm/mach-sunxi/pm/standby/standby_power.o CC arch/arm/mach-sunxi/pm/standby/standby_twi.o CC arch/arm/mach-sunxi/pm/standby/standby_usb.o AS arch/arm/mach-sunxi/pm/standby/standby_delay.o CC arch/arm/mach-sunxi/pm/standby/./arisc/standby_arisc.o CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_hwmsgbox.o CHK kernel/config_data.h CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_message_manager.o CC arch/arm/mach-sunxi/pm/standby/./../pm_debug.o CC arch/arm/mach-sunxi/pm/standby/./../mem_timing.o CC arch/arm/mach-sunxi/pm/standby/./../mem_mmu_pc.o AS arch/arm/mach-sunxi/pm/standby/./../mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/standby/./../mem_serial.o CC arch/arm/mach-sunxi/pm/standby/./../mem_printk.o AS arch/arm/mach-sunxi/pm/standby/./../mem_divlib.o CC arch/arm/mach-sunxi/pm/standby/./../mem_divlibc.o CC arch/arm/mach-sunxi/pm/standby/./../mem_int.o CC arch/arm/mach-sunxi/pm/standby/./../mem_tmr.o CC arch/arm/mach-sunxi/pm/standby/./../mem_tmstmp.o CC arch/arm/mach-sunxi/pm/standby/./../mem_clk.o CC arch/arm/mach-sunxi/pm/standby/./../mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/standby.o rm -rf *.o arch/arm/mach-sunxi/pm/standby/../*.o CC arch/arm/mach-sunxi/pm/standby/super/common.o CC arch/arm/mach-sunxi/pm/standby/super/super_twi.o CC [M] drivers/net/wireless/bcmdhd/dhd_sdio.o AS arch/arm/mach-sunxi/pm/standby/super/super_delay.o CC arch/arm/mach-sunxi/pm/standby/super/super_clock.o CC arch/arm/mach-sunxi/pm/standby/super/super_power.o CC arch/arm/mach-sunxi/pm/standby/super/super_cpus.o AS arch/arm/mach-sunxi/pm/standby/super/resume/resume1.o CC arch/arm/mach-sunxi/pm/standby/super/resume/resume_head.o CC arch/arm/mach-sunxi/pm/standby/super/resume/resume1_c_part.o CC arch/arm/mach-sunxi/pm/standby/../pm_debug.o CC arch/arm/mach-sunxi/pm/standby/../mem_timing.o CC arch/arm/mach-sunxi/pm/standby/../mem_mmu_pc.o AS arch/arm/mach-sunxi/pm/standby/../mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/standby/../mem_cpu.o CC arch/arm/mach-sunxi/pm/standby/../mem_serial.o CC arch/arm/mach-sunxi/pm/standby/../mem_printk.o CC [M] drivers/net/wireless/bcmdhd/dhd_cdc.o CC [M] drivers/net/wireless/bcmdhd/bcmsdh_linux.o CC [M] drivers/net/wireless/bcmdhd/dhd_common.o AS arch/arm/mach-sunxi/pm/standby/../mem_divlib.o CC arch/arm/mach-sunxi/pm/standby/../mem_divlibc.o drivers/net/wireless/bcmdhd/dhd_sdio.c: In function ‘dhdsdio_chipmatch’: drivers/net/wireless/bcmdhd/dhd_sdio.c:6936:16: error: ‘BCM43430_CHIP_ID’ undeclared (first use in this function) drivers/net/wireless/bcmdhd/dhd_sdio.c:6936:16: note: each undeclared identifier is reported only once for each function it appears in CC arch/arm/mach-sunxi/pm/standby/../mem_int.o make[4]: *** [drivers/net/wireless/bcmdhd/dhd_sdio.o] 错误 1 make[4]: *** 正在等待未完成的任务.... CC arch/arm/mach-sunxi/pm/standby/../mem_tmr.o CC arch/arm/mach-sunxi/pm/standby/../mem_tmstmp.o CC arch/arm/mach-sunxi/pm/standby/../mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/../mem_clk.o Source file is open Destination file is created. Source file is open Destination file is open. temp value is 400. 0 soure_file size is 9496. destination_file size is 0x2800. check sum generated is 0x68D92007. Everything is ok. rm -rf *.o arch/arm/mach-sunxi/pm/standby/../*.o CC arch/arm/mach-sunxi/pm/mem_mapping.o CC arch/arm/mach-sunxi/pm/mem_divlibc.o CC arch/arm/mach-sunxi/pm/mem_cpu.o AS arch/arm/mach-sunxi/pm/mem_cpu_asm.o AS arch/arm/mach-sunxi/pm/mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/mem_mmu_pc.o CC arch/arm/mach-sunxi/pm/mem_int.o CC arch/arm/mach-sunxi/pm/mem_clk.o CC arch/arm/mach-sunxi/pm/mem_tmr.o CC arch/arm/mach-sunxi/pm/mem_tmstmp.o CC arch/arm/mach-sunxi/pm/mem_twi.o CC arch/arm/mach-sunxi/pm/mem_gpio.o CC arch/arm/mach-sunxi/pm/mem_sram.o CC arch/arm/mach-sunxi/pm/mem_ccu.o CC arch/arm/mach-sunxi/pm/mem_cci400.o CC arch/arm/mach-sunxi/pm/mem_gtbus.o CC arch/arm/mach-sunxi/pm/pm_debug.o CC arch/arm/mach-sunxi/pm/mem_timing.o CC arch/arm/mach-sunxi/pm/mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/pm.o CC arch/arm/mach-sunxi/pm/extended_standby.o CC arch/arm/mach-sunxi/pm/standby/super/super_power.o CC arch/arm/mach-sunxi/pm/standby/super/super_twi.o CC arch/arm/mach-sunxi/pm/standby/super/super_clock.o AS arch/arm/mach-sunxi/pm/standby.o AS arch/arm/mach-sunxi/pm/mem.o LD arch/arm/mach-sunxi/pm/pm_tmp.o LD arch/arm/mach-sunxi/pm/built-in.o LD arch/arm/mach-sunxi/built-in.o make[3]: *** [drivers/net/wireless/bcmdhd] 错误 2 make[2]: *** [drivers/net/wireless] 错误 2 make[1]: *** [drivers/net] 错误 2 make: *** [drivers] 错误 2 ERROR: build kernel Failed rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ 21、（dhdsdio_probe_attach: unsupported chip: 0xa9a6） R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\include\bcmdevs.h #define BCM4350_CHIP_ID 0x4350 #define BCM43430_CHIP_ID 43430 /* 43430 chipcommon chipid 0xa9a6 */ #define BCM4342_CHIP_ID 4342 可以编译通过了。（查看属性：） shell@astar-y3:/ $ shell@astar-y3:/ $ cd /system/vendor/modules/ shell@astar-y3:/system/vendor/modules $ ll bcm* -rw-r--r-- root root 26020 2017-06-26 12:46 bcm43438a0.hcd -rw-r--r-- root root 748856 2017-06-26 12:46 bcmdhd.ko shell@astar-y3:/system/vendor/modules $ Microsoft Windows [版本 6.1.7600] 版权所有 (c) 2009 Microsoft Corporation。保留所有权利。 C:\Users\Administrator>cd R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\n et\wireless\bcmdhd C:\Users\Administrator>r: R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd>adb remount * daemon not running. starting it now on port 5037 * * daemon started successfully * remount succeeded R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd> R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd>adb push bcmdhd.ko /system/vendor/modules/ 1677 KB/s (748864 bytes in 0.436s) R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd> 继续查看属性： shell@astar-y3:/system/vendor/modules $ ll bcm* -rw-r--r-- root root 26020 2017-06-26 12:46 bcm43438a0.hcd -rw-rw-rw- root root 748864 2017-06-26 14:34 bcmdhd.ko shell@astar-y3:/system/vendor/modules $ shell@astar-y3:/system/vendor/modules $ shell@astar-y3:/system/vendor/modules $ chmod 644 bcmdhd.ko Unable to chmod bcmdhd.ko: Operation not permitted 10|shell@astar-y3:/system/vendor/modules $ （必须在su下才能够修改属性：） shell@astar-y3:/system/vendor/modules $ su shell@astar-y3:/system/vendor/modules # chmod 644 bcmdhd.ko shell@astar-y3:/system/vendor/modules # shell@astar-y3:/system/vendor/modules # sync shell@astar-y3:/system/vendor/modules # reboot 22、 [ 0.658241] [wifi]: select wifi: ap6210 !! [ 0.658587] [ap6xxx]: module power name axp22_dldo1 [ 0.658601] [ap6xxx]: module power ext1 name axp22_dldo2 [ 0.658613] [ap6xxx]: module power ext2 name axp22_aldo1 [ 0.658721] [ap6xxx]: get ap6xxx wifi_power_switch failed [ 0.658731] [ap6xxx]: ap6xxx module power set by axp. [ 0.658930] [ap6xxx]: first time [ 0.659285] [ap6xxx]: regulator on. [ 0.661306] [wifi_pm]: wifi gpio init is OK !! （重启之后，WIFI模块要想办法配置为ap6212，现阶段借用的是AP6210！） [ 8.517657] gpio ap6xxx_wl_regon set val 1, act val 1 [ 8.623325] [ap6xxx]: sdio wifi power state: on [ 8.628389] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.628566] =========== WLAN placed in POWER ON ======== [ 8.645459] [mmc]: sdc1 card_power_on start... [ 8.650397] [mmc]: sdc1 power_supply is null [ 8.655129] [mmc]: sdc1 card_power_on ok [ 8.680031] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.690267] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.772360] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 8.781316] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 8.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.799684] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.861971] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.872189] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.933887] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 8.941921] *******************Try sdio******************* [ 8.948329] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.958545] [mmc]: mclk 0xf1c2008c 0x8002000e [ 9.027690] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 9.035325] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 9.043192] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 9.052046] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 9.145358] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 9.155486] [mmc]: mclk 0xf1c2008c 0x8002000e [ 9.215398] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 9.225785] [mmc]: mclk 0xf1c2008c 0x8100000b [ 9.285721] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 9.296049] [mmc]: mclk 0xf1c2008c 0x8140030b [ 9.357922] mmc1: new high speed SDIO card at address 0001 [ 9.364523] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 9.364563] *******************sdio init ok******************* [ 9.377203] bcm_wlan_get_oob_irq enter. [ 9.381534] gpio [359] map to virq [7] ok [ 9.388816] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 9.396740] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 9.404660] dhdsdio_probe: Disable prop_txstatus [ 9.410903] wl_create_event_handler(): thread:wl_event_handler:5d started [ 9.410914] tsk Enter, tsk = 0xddca13d8 [ 9.423788] p2p0: P2P Interface Registered [ 9.428464] dhd_attach(): thread:dhd_watchdog_thread:5e started [ 9.435144] dhd_attach(): thread:dhd_dpc:5f started [ 9.440653] dhd_attach(): thread:dhd_sysioc:60 started [ 9.447276] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 [ 9.456558] [ 9.456561] Dongle Host Driver, version 1.88.45.3 (r420671) [ 9.456565] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 9.472427] gpio ap6xxx_wl_regon set val 0, act val 0 [ 9.578054] [ap6xxx]: sdio wifi power state: off [ 9.583186] =========== WLAN placed in RESET ======== （WIFI启动加载正常） shell@astar-y3:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13604 0 - Live 0x00000000 vfe_v4l2 445364 0 - Live 0x00000000 gc2035 12696 0 - Live 0x00000000 gc0308 10702 0 - Live 0x00000000 vfe_subdev 4523 3 vfe_v4l2,gc2035,gc0308, Live 0x00000000 vfe_os 4099 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21594 2 gc2035,gc0308, Live 0x00000000 videobuf_dma_contig 5535 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcmdhd 556965 0 - Live 0x00000000 leds_sunxi 1351 0 - Live 0x00000000 mali 209914 20 - Live 0x00000000 (O) lcd 38180 0 - Live 0x00000000 disp 993096 8 mali,lcd, Live 0x00000000 nand 280622 0 - Live 0x00000000 (O) shell@astar-y3:/ $ （bcmdhd.ko这个驱动模块加载正常：）（BT没有打开，但是不停地打印BT超时出错，不知道是何解？） shell@astar-y3:/ $ [ 511.880344] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 511.887326] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle 23、由于此时WIFI出于记住上一次的状态的状态（打不开），所以需要重新刷镜像IMG，然后替换：bcmdhd.ko shell@astar-y3:/ $ shell@astar-y3:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13604 0 - Live 0x00000000 vfe_v4l2 445364 0 - Live 0x00000000 gc2035 12696 0 - Live 0x00000000 gc0308 10702 0 - Live 0x00000000 vfe_subdev 4523 3 vfe_v4l2,gc2035,gc0308, Live 0x00000000 vfe_os 4099 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21594 2 gc2035,gc0308, Live 0x00000000 videobuf_dma_contig 5535 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcmdhd 556965 0 - Live 0x00000000 leds_sunxi 1351 0 - Live 0x00000000 mali 209914 15 - Live 0x00000000 (O) lcd 38180 0 - Live 0x00000000 disp 993096 8 mali,lcd, Live 0x00000000 nand 280622 0 - Live 0x00000000 (O) shell@astar-y3:/ $ shell@astar-y3:/ $ shell@astar-y3:/ $ [ 110.012176] init: computing context for service '/system/bin/wpa_supplicant' [ 110.025400] init: starting 'p2p_supplicant' [ 110.039886] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 110.119751] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 110.140144] [ 110.140153] Dongle Host Driver, version 1.88.45.3 (r420671) [ 110.140158] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 110.173523] wl_android_wifi_on in 1 [ 110.177409] wl_android_wifi_on in 2: g_wifi_on=0 [ 110.200103] gpio ap6xxx_wl_regon set val 1, act val 1 [ 110.280025] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 110.286694] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle [ 110.355684] [ap6xxx]: sdio wifi power state: on [ 110.360930] =========== WLAN going back to live ======== [ 110.366925] sdio_reset_comm(): [ 110.370346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.380773] [mmc]: mclk 0xf1c2008c 0x8140030b [ 110.443029] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.454758] [mmc]: mclk 0xf1c2008c 0x8140030b [ 110.516097] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.530958] [mmc]: mclk 0xf1c2008c 0x80430309 [ 110.592013] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.603518] [mmc]: mclk 0xf1c2008c 0x80030009 [ 110.681418] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 110.690726] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 110.700331] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 110.712218] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 110.894520] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.904933] [mmc]: mclk 0xf1c2008c 0x80030009 [ 110.964907] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.975514] [mmc]: mclk 0xf1c2008c 0x8100000b [ 111.035618] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 111.046398] [mmc]: mclk 0xf1c2008c 0x8140030b [ 111.108547] [ 111.108566] [ 111.108579] dhd_bus_devreset: == WLAN ON == [ 111.116882] dhd_bus_devreset called when dongle is not in reset [ 111.123683] Will call dhd_bus_start instead [ 111.128637] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 111.140963] dhd_conf_download_config: Ignore config file /system/vendor/modules/config.txt [ 111.151802] Final fw_path=/system/vendor/modules/fw_bcm43438a0.bin [ 111.158689] Final nv_path=/system/vendor/modules/nvram_ap6210.txt [ 111.165542] Final conf_path=/system/vendor/modules/config.txt [ 111.257577] dhdsdio_download_nvram: Open nvram file failed /system/vendor/modules/nvram_ap6210.txt [ 111.268309] _dhdsdio_download_firmware: dongle nvram file download failed [ 111.276022] dhd_bus_start: dhdsdio_probe_download failed. firmware = /system/vendor/modules/fw_bcm43438a0.bin nvram = /system/vendor/modules/nvram_ap6210.txt config = /system/vendor/modules/config.txt [ 111.295979] dhd_bus_devreset: dhd_bus_start fail with -1 [ 111.304154] dhd_dev_reset: dhd_bus_devreset: -1 [ 111.309190] dhd_prot_ioctl : bus is down. we have nothing to do [ 111.330328] dhd_bus_devreset: WLAN OFF DONE [ 111.335225] gpio ap6xxx_wl_regon set val 0, act val 0 [ 111.472499] [ap6xxx]: sdio wifi power state: off [ 111.477661] =========== WLAN placed in RESET ======== [ 111.483304] wl_android_wifi_on: Failed [ 111.487473] wl_android_wifi_off in 1 [ 111.491478] wl_android_wifi_off in 2: g_wifi_on=0 [ 111.496711] wl_android_wifi_off out [ 111.509335] init: waitpid returned pid 1211, status = 0000ff00 [ 111.516072] init: process 'p2p_supplicant', pid 1211 exited shell@astar-y3:/ $ shell@astar-y3:/ $ 24、定位问题：dhd_bus_devreset: dhd_bus_start fail with -1 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "dhd_bus_start fail with" . -R ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "dhd_bus_start fail with" . -R ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ int dhd_bus_devreset(dhd_pub_t *dhdp, uint8 flag) { …… dhd_conf_set_fw_name_by_chip(dhdp, fw_path, firmware_path); if ((bcmerror = dhd_bus_start(dhdp)) != 0) DHD_ERROR(("%s: dhd_bus_start fail with %d\n", __FUNCTION__, bcmerror)); } } return bcmerror; } rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep dhd_bus_start . -R ./dhd_sdio.c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio.c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio.c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd_sdio - 副本.c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio - 副本.c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio - 副本.c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio - 副本.c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio - 副本.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd_sdio - 副本 (2).c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio - 副本 (2).c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio - 副本 (2).c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio - 副本 (2).c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio - 副本 (2).c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd.h:extern int dhd_bus_start(dhd_pub_t *dhdp); ./wl_android.c:/* Initialize g_wifi_on to 1 so dhd_bus_start will be called for the first ./dhd_linux.c: if ((ret = dhd_bus_start(&dhd->pub)) != 0) { ./dhd_linux.c: /* dhd_prot_init has been called in dhd_bus_start or wl_android_wifi_on */ ./dhd_linux.c:dhd_bus_start(dhd_pub_t *dhdp) rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ 定位到这里： int dhd_bus_start(dhd_pub_t *dhdp) { …… /* try to download image and nvram to the dongle */ if ((dhd->pub.busstate == DHD_BUS_DOWN) && (fw_path[0] != '\0') && (nv_path[0] != '\0')) { #ifdef SHOW_NVRAM_TYPE { /* Show nvram type in the kernel log */ int i; for (i = 0; nv_path[i] != '\0'; ++i) { if (nv_path[i] == '.') { ++i; break; } } DHD_ERROR(("%s: nvram_type = [%s]\n", __FUNCTION__, &nv_path[i])); } #endif /* SHOW_NVRAM_TYPE */ /* wake lock moved to dhdsdio_download_firmware */ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh, fw_path, nv_path, conf_path))) { DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s config = %s\n", __FUNCTION__, fw_path, nv_path, conf_path)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ // 2017/6/23 18:40 wenyuanbo download ap6212 fail not return error!!!! //return -1; } } …… return 0; } 由于ap6212没有config.txt文件，下载肯定会出错，比对全志R16平台去AP6212的处理，关闭这里： //return -1; 25、 shell@astar-y3:/ $ shell@astar-y3:/ $ [ 110.012176] init: computing context for service '/system/bin/wpa_supplicant' [ 110.025400] init: starting 'p2p_supplicant' [ 110.039886] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 110.119751] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 110.140144] [ 110.140153] Dongle Host Driver, version 1.88.45.3 (r420671) [ 110.140158] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 110.173523] wl_android_wifi_on in 1 [ 110.177409] wl_android_wifi_on in 2: g_wifi_on=0 [ 110.200103] gpio ap6xxx_wl_regon set val 1, act val 1 [ 110.280025] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 110.286694] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle [ 110.355684] [ap6xxx]: sdio wifi power state: on [ 110.3

驱动开发/核心开发

21,616

社区成员

21,711

社区内容

发帖

与我相关

我的任务

社区管理员

加入社区

近7日
近30日
至今

加载中

查看更多榜单

社区公告

暂无公告

试试用AI创作助手写篇文章吧

+ 用AI写文章