This project shows you how to configure the DragonBoard 410c to allow it to control a model railway using DCC (Digital Command and Control) and open source JMRI software, via a USB/DCC interface. In this particular case, the focus is on controlling the track and signaling, but the codebase also includes the ability to program DCC locomotives.
这个项目展现中如何已 DragonBoard 410c 为基础,利用DCC和开源软件JIMR控制一条铁路。这个项目主要专注于控制信号和模型火车的轨迹,所有的数据都是在火车头中。
硬件配置
Materials Required / Parts List / Tools
SPROG II or 3 USB to DCC convertor
14v 4 A dc power supply ST-C-070-14000400
(Note – this voltage is suitable for OO/HO – a lower voltage should suffice for N gauge)
Monitor with HDMI cable
LH14Q Box for DragonBoard
L47AY 96 Boards compatible power connector
USB Keyboard & mouse
USB min-hub and USB cables
Model railway to control
DCC fitted signals, turnouts etc.
Sundries – microSDHC card with SDHC adaptor, M2.5 nylon pillars & screws, 24/0.2 wire
软件配置
Source Code / Source Examples / Application Executable
JMRI Software suite 4.3.5 or newer
额外配置
Additional Resources
96 Boards CE Specification
NMRA DCC Standard
DCC description