内核USB跑着跑着就挂了

magic87 2018-04-10 01:01:00
<6>[ 30.663138] usb 4-1: USB disconnect, device number 2
<6>[ 31.460238] usb 4-1: new low-speed USB device number 3 using sunxi_hcd_host0
<3>[ 31.460639] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.461057] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.461487] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.580125] usb 4-1: device descriptor read/64, error -71
<3>[ 31.690585] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.691020] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.691561] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.810236] usb 4-1: device descriptor read/64, error -71
<6>[ 32.041146] usb 4-1: new low-speed USB device number 4 using sunxi_hcd_host0
<3>[ 32.041609] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.042053] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.042506] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.160302] usb 4-1: device descriptor read/64, error -71
<3>[ 32.270523] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.270998] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.271516] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.390181] usb 4-1: device descriptor read/64, error -71
<6>[ 32.620191] usb 4-1: new low-speed USB device number 5 using sunxi_hcd_host0
<3>[ 32.620563] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 32.830395] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<4>[ 32.938355] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[ 32.938402] RTL871X: ==>ips_leave cnts:2
<4>[ 32.938422] RTL871X: ===> rtw_ips_pwr_up..............
<4>[ 32.938430] RTL871X: ===> ips_netdrv_open.........
<4>[ 32.938439] RTL871X: rtl8723bs_hal_init: Leaving IPS in FWLPS state
<4>[ 32.938675] RTL871X: rtl8723bs_hal_init: write rpwm=40
<4>[ 32.946012] RTL871X: rtl8723bs_hal_init: polling cpwm ok when leaving IPS in FWLPS state, cpwm_orig=00, cpwm_now=80, 0x100=0x3f
<4>[ 32.946029] RTL871X: rtl8723b_set_FwPwrModeInIPS_cmd()
<4>[ 32.946211] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=1
<3>[ 33.040083] usb 4-1: device not accepting address 5, error -71
<4>[ 33.151852] RTL871X: #### hw_var_set_opmode() -5258 iface_type(0) mode = 2 ####
<4>[ 33.152950] RTL871X: ===>phy_SwChnl8723B: Channel = 1
<4>[ 33.154248] RTL871X: Using the default RF gain.
<4>[ 33.154455] RTL871X: <=== rtw_ips_pwr_up.............. in 220ms
<4>[ 33.154463] RTL871X: nolinked power save leave
<4>[ 33.154544] RTL871X: ==> ips_leave.....LED(0x00e08282)...
<6>[ 33.160249] usb 4-1: new low-speed USB device number 6 using sunxi_hcd_host0
<3>[ 33.160605] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<4>[ 19.320039] CPU1: Booted secondary processor
<4>[ 33.361751] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[ 33.363915] RTL871X: ===>phy_SwChnl8723B: Channel = 1
<3>[ 33.375461] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010


<6>[ 0.850475] hub 4-0:1.0: USB hub found
<6>[ 0.852951] usbcore: registered new interface driver iboardtouch
<6>[ 0.853014] usbcore: registered new interface driver usbtouch
<6>[ 0.853014] usbcore: registered new interface driver usbtouch
<6>[ 0.877738] usbcore: registered new interface driver usbhid
<6>[ 0.877738] usbcore: registered new interface driver usbhid
<6>[ 0.877745] usbhid: USB HID core driver
<6>[ 0.877745] usbhid: USB HID core driver
<6>[ 1.050055] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
<6>[ 1.050055] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
<6>[ 1.202462] hub 1-1:1.0: USB hub found
<6>[ 1.320042] usb 2-1: new high-speed USB device number 2 using sunxi-ehci
<6>[ 1.320042] usb 2-1: new high-speed USB device number 2 using sunxi-ehci
<6>[ 1.472300] hub 2-1:1.0: USB hub found
<6>[ 1.550424] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
<6>[ 1.550424] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
<6>[ 1.668039] scsi0 : usb-storage 1-1.1:1.0
<6>[ 1.760394] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
<6>[ 1.760394] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
<6>[ 2.070429] usb 1-1.4: new high-speed USB device number 5 using sunxi-ehci
<6>[ 2.070429] usb 1-1.4: new high-speed USB device number 5 using sunxi-ehci
<3>[ 5.500328] WRN:L486(drivers/usb/sunxi_usb/hcd/hcd0/sunxi_hcd0.c):get no_suspend status failed
<3>[ 5.500328] WRN:L486(drivers/usb/sunxi_usb/hcd/hcd0/sunxi_hcd0.c):get no_suspend status failed
<6>[ 6.380136] usb 4-1: new low-speed USB device number 2 using sunxi_hcd_host0
<6>[ 6.380136] usb 4-1: new low-speed USB device number 2 using sunxi_hcd_host0
<6>[ 6.418823] usbcore: registered new interface driver r8152
<6>[ 6.423854] usbcore: registered new interface driver cdc_ether
<6>[ 6.488327] usbcore: registered new interface driver uvcvideo
<6>[ 6.488336] USB Video Class driver (v1.1.1)
<6>[ 6.529188] generic-usb 0003:1A2C:0042.0001: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-sunxi_hcd_host0-1/input0
<6>[ 6.529188] generic-usb 0003:1A2C:0042.0001: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-sunxi_hcd_host0-1/input0
<6>[ 6.529188] generic-usb 0003:1A2C:0042.0001: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-sunxi_hcd_host0-1/input0
<6>[ 6.529188] generic-usb 0003:1A2C:0042.0001: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-sunxi_hcd_host0-1/input0
<6>[ 6.600584] usb 1-1.4: reset high-speed USB device number 5 using sunxi-ehci
<6>[ 6.600584] usb 1-1.4: reset high-speed USB device number 5 using sunxi-ehci
<3>[ 6.603124] android_usb: already disabled
<3>[ 6.603315] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<3>[ 6.604043] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<3>[ 27.367216] WRN:L2105(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_host_rx, end 2 RX proto error(0x1004)
<3>[ 27.367216] WRN:L2105(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_host_rx, end 2 RX proto error(0x1004)
<6>[ 30.663138] usb 4-1: USB disconnect, device number 2
<6>[ 30.663138] usb 4-1: USB disconnect, device number 2
<6>[ 31.460238] usb 4-1: new low-speed USB device number 3 using sunxi_hcd_host0
<6>[ 31.460238] usb 4-1: new low-speed USB device number 3 using sunxi_hcd_host0
<3>[ 31.460639] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.460639] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.461057] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.461057] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.461487] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.461487] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.580125] usb 4-1: device descriptor read/64, error -71
<3>[ 31.690585] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.690585] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.691020] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.691020] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.691561] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.691561] WRN:L1567(drivers/usb/sunxi_usb/hcd/core/sunxi_hcd_host.c):ERR: sunxi_hcd_h_ep0_irq, no response, csr0 0010
<3>[ 31.810236] usb 4-1: device descriptor read/64, error -71
<6>[ 32.041146] usb 4-1: new low-speed USB device number 4 using sunxi_hcd_host0
<6>[ 32.041146] usb 4-1: new low-speed USB device number 4 using sunxi_hcd_host0

...全文
1337 2 打赏 收藏 转发到动态 举报
写回复
用AI写文章
2 条回复
切换为时间正序
请发表友善的回复…
发表回复
赵4老师 2018-04-10
  • 打赏
  • 举报
回复
http://blog.csdn.net/zhao4zhong1/article/details/53078924 老司机找bug的十年心路历程
JiMoKuangXiangQu 2018-04-10
  • 打赏
  • 举报
回复
两点小建议: 1. 增加问题复现场景描述 2. 检查硬件连接状态 3. 检查usb设备节点是否还存在

69,371

社区成员

发帖
与我相关
我的任务
社区描述
C语言相关问题讨论
社区管理员
  • C语言
  • 花神庙码农
  • 架构师李肯
加入社区
  • 近7日
  • 近30日
  • 至今
社区公告
暂无公告

试试用AI创作助手写篇文章吧