华为ap5030dn升级失败,求救大神解决办法
AP5030DN-FAT-V200R019C00SPC803 升级 AP5030DN-FAT-V200R019C00SPC902失败,无限重启
ar7240> update system FatAP5X30XN_V200R019C00SPC903.upgrade_assistant_package.bin
Using eth0 device
TFTP from server 169.254.1.100; our IP address is 169.254.1.1
Filename 'FatAP5X30XN_V200R019C00SPC903.upgrade_assistant_package.bin'.
Load address: 0x80060000
Loading: #################################################################
#################################################################
done
Bytes transferred = 4951868 (4b8f3c hex)
EFS tail number: 9
APP Packet Practical Size: 0x4b8da4, Begin Address in Mem: 0x80060020, End Address in Mem: 0x80518dc4
$APP Packet CRC: 0x5910dfd2, Kernel Size: 0x00, RootFs Size: 0x00,Bios Size: 0x00, Extend Bios Size: 0x00, FitFatFlag:0x02, SubType:0x00, Transize:0x4b8430,endaddr:0x80518dc4,actendaddr:0x805189c0
AP5X30XN V200R019C00SPC903B003
AP3X30XN V200R019C00SPC903B003
AP3010DN-V2 V200R019C00SPC903B003
AP4030DN-E V200R019C00SPC903B003
AP9X32XN V200R019C00SPC903B003
AP5030DN-S V200R019C00SPC903B003
AP9X31XN V200R019C00SPC903B003
AP4X30XN V200R019C00SPC903B003
Write SysImage to Address(area A): 0x9e100000
Goto FAT AP updating process
Writing PART-I of AP_SysImage to Flash, Maybe Long Time, Please Wait...
Warning: Do Not Power-Off!
................................................................................................Writing PART-II of AP_SysImage to Flash, Maybe Long Time, Please Wait...
Warning: Do Not Power-Off!
Upgrade Software Package fail
ar7240>
ar7240> update boot
Using eth0 device
TFTP from server 169.254.1.100; our IP address is 169.254.1.1
Filename 'u-boot.bin'.
Load address: 0x80060000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
done
Bytes transferred = 25098884 (17efa84 hex)
Wrong uboot file or CRC error!
please use a correct u-boot.bin,
or use 'update system sysimagefile-name' to update uboot.
check boot file fail!
ar7240>
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting QCA955x
init_bsp_adapter ...OK.
mm_init ...OK.
sched_init ...OK.
softirq_init ...OK.
console_init ...OK.
thread_info_cache_init ...OK.
fork_init ...OK.
dbg_late_init ...OK.
imv_init_complete ...OK.
Linux version 2.6.34.15-WR4.3.0.0_standard (gcc version 4.8.1 (GCC) )
#1 PREEMPT Wed Jul 29 18:27:40 CST 2020
flash_size passed from bootloader = 32 MB
arg 1: console=ttyS0,9600
arg 2: root=/dev/mtdblock5
arg 3: rootfstype=squashfs
arg 4: init=/sbin/init
arg 5: mtdparts=ath-nor0:512k(BiosA),128k(BootupA),128k(BootupB),128k(BootEnv),128k(BoardData),12288k(SysImageA),3072k(configA),512k(BiosB),128k(ResultA),128k(ResultB),12288k(SysImageB),3072k(configB),256k(ArtArgs);
arg 6: mem=254M
cpu apb ddr apb cpu-720MHZ,ddr-600MHZ,ahb-200MHZ
Zone PFN ranges:
Normal 0x00000000 -> 0x0000fe00
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x0000fe00
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64516
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock5 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:512k(BiosA),128k(BootupA),128k(BootupB),128k(BootEnv),128k(BoardData),12288k(SysImageA),3072k(configA),512k(BiosB),128k(ResultA),128k(ResultB),12288k(SysImageB),3072k(configB),256k(ArtArgs); mem=254M
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
FWD_MEM: aligned address 82000000
FWD_MEM: 02000000
FWD_MEM: Allocating 64MB (16384 pages) of memory at addr 82000000
the pci irq_base value: 75
the pci irq_base value: 75
plat_time_init:.............................................................done
Mount-cache hash table entries: 512
Registering WDT.............................................................done
ath_pcibios_init: bus 0
PCI init:...................................................................done
ath_pcibios_init(242): PCI 0 CMD write: 0x356
registering PCI controller with io_map_base unset
ath_pcibios_init: bus 1
***** Warning PCIe 1 H/W not found !!!
re